Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
Traffic
IP
subnet
mask
default:
Description:
Satellite
IP address default:
Description:
Satellite
IP
subnet
mask
default:
Description:
Table 6-39 Traffic/Satellite IP Address & Subnet Mask
6.2.22.11
M&C and IP Traffic Ethernet Speed/Duplex
Table 6-40 lists the different Ethernet speed and duplex settings for the modem's Ethernet
interfaces. The M&C interface and IP traffic interface can be set independently of each
other. Changes will be effective immediately but when an auto-negotiated mode is selected
then any ethernet connection will be briefly disconnected while the change takes effect.
The Auto setting is recommended for normal use but because ethernet auto-negotiation
varies between different manufacturers it may be necessary to fix the speed and duplex in
some circumstances. The type of cable (crossover or straight) is always automatically
sensed by the modem, which will work with either type.
Auto
10M half-duplex
10M full duplex
100M half-duplex
100M full duplex
255.255.255.0
This sets the subnet mask for the modem's IP Traffic port.
0.0.0.0 (only available in routing mode)
This sets the IP address for the modem's satellite IP port. This is
only used when in routing mode, when the modem acts as a two-
port router. This address will be part of the common satellite
subnet.
255.255.255.0 (only available in routing mode)
This sets the subnet mask for the modem's satellite IP port.
In this mode the modem will auto-negotiate the Ethernet speed
and duplex settings.
In this mode the modem will auto-negotiate the Ethernet speed
and duplex settings but as part of the negotiation will 'advertise'
10Mbps half-duplex as the only option available.
The modem will auto-negotiate the Ethernet speed and duplex
settings but as part of the negotiation will 'advertise' 10Mbps full
duplex as the only option available.
The modem will auto-negotiate the Ethernet speed and duplex
settings but as part of the negotiation will 'advertise' 100Mbps
half-duplex as the only option available.
The modem will auto-negotiate the Ethernet speed and duplex
settings but as part of the negotiation will 'advertise' 100Mbps full
duplex as the only option available.
6-55
Advertisement
Table of Contents
