Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
This concludes the router configuration for the worked example, and everything should be
working as expected based on figure 8-32 at the start of this Section. If not, please check
router configuration and the status of the modems. If problems persist, power cycle all
equipment and re-check.
When testing internet connectivity, each remote laptop can be downloading data i.e. like a
video stream or large file download. It then should be possible to see traffic for each VLAN
in the QoS IP graph, like below. Use 'Select class' drop down menu to switch the graph. In
our case Class1 = VLAN10, Class2 = VLAN20 & Class3 = VLAN30. As you may remember
we set each VLAN to take a third of the data equally when loaded, then burst to 99% when
traffic was available.
Figure 8-53 Throughput graph for VLAN 1 (Class 1)
This concludes the system worked example.
8-65
Advertisement
Table of Contents
