Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
6.2.24.5 Earth Station Latitude
Range
-90 Degrees to +90 Degrees; step size: 0.01 Degrees
Description:
The latitudinal position corresponding to the modem location. A positive
number indicates North and a minus sign can be used to indicate South
of the equator. If using the modem front panel then the Up and Down
arrow keys are used for setting '+' and '-', respectively.
6.2.24.6 Calculated Satellite Delay
This is a display of the calculated satellite delay for reference purposes. This field cannot
be edited.
6.2.24.7 Minimum Round-trip Delay
Range
0.01ms to 300ms ; step size: 0.01ms
When manually entering the delay using the 'Set Delay' for the Round-
Description:
trip delay setting, then this is the minimum satellite round-trip delay.
Note: To minimize the Paired Carrier acquisition time over satellite, set
this to the actual measured satellite delay value (shown on the Status
screen) minus 0.5ms.
If using Paired Carrier on in a local bench test setting, (i.e. no satellite
delay) then 0.01ms can use used.
6.2.24.8 Maximum Round-trip Delay
Range
0.01ms to 300ms ; step size: 0.01ms
When manually entering the delay using the 'Set Delay' for the Round-
Description:
trip delay setting, then this is the maximum satellite round-trip delay.
Note: To minimize the Paired Carrier acquisition time over satellite, set
this to the actual measured satellite delay value (shown on the Status
screen) plus 0.5ms.
If using Paired Carrier on in a local bench test setting, (i.e. no satellite
delay) then 0.05ms can use used.
Table 6-53 Earth Station Latitude
Table 6-54 Minimum Round-trip Delay
Table 6-55 Maximum Round-trip Delay
6-64
Advertisement
Table of Contents
