Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
Log/Alarm Clear
The system log and system alarms can be cleared by pressing the 0 key when on the front-
panel View->Log and View->Alarms screens.
6.3.2
LCD Screen Layout
The front panel user interface uses a menu system to present choices to the user. These
in turn allow either the selection of a value from a list of options or require the setting of a
new value. Examples of these types of screen are shown below.
Figure 6-77 Screen Type 1: Menu Selection from Pre-defined List
Features that are not available appear on the display are preceded
by a '#'. There are several reasons why a feature may not be
available:
•
•
6.3.3
Front Panel Menu Structure
The front-panel menu hierarchy broadly follows the same structure as the web user
interface starting with the MAIN menu shown in Figure 6-75
The Main menu can be accessed from any display by pressing the MAIN key. It is from this
menu that all functions are selected.
It contains the following sub-menus:
Status
Displays modem operational status summary information.
Edit
Allows modification of the modem configurable properties.
1:System
3:Modcod
5:Demods
Tx carrier frequency:
[070.0000]
New:[070.0000] 50-90 100-180MHz
Figure 6-78 Screen Type 2: Entry of New Value
The feature is a Software Activated Feature (SAF) and the
appropriate SAF code has not been enabled. Please contact
Paradise Sales who can quote and issue a SAF key to unlock
the feature.
The feature is available, but its use is precluded by the current
operational modem settings.
2:Service
4:Carrier
6-90
Advertisement
Table of Contents
