Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
6.3.5
Uploading Configuration files to Modem - Via the Front Panel
With a USB drive inserted into the front of the modem, navigate to the memory screen.
Main, Edit, Memories.
1:Store
3:Erase
5:Load USB
Press 'Load USB' to load a configuration file from the USB drive.
Use the up and down arrows to scroll through all of the .conf files in the root directory of the USB
drive. Once the required file is found, press enter. Once loaded the name will appear within the top
set of brackets.
Load: select config required
[
]
New:[TEST04142020]
Once the configuration file is loaded into the modem, it can be recalled. From the memories menu,
press '2:Recall'.
1:Store
3:Erase
5:Load USB
Use the up and down arrows to find the configuration file you require. Press enter once found and
the name will appear within the top set of brackets when the configuration is applied to the modem.
Recall: select config required
[
]
New:[TEST04142020]
Note: When a configuration is uploaded to the modem via the USB drive, the M&C address remains
unchanged in the file. When the configuration is recalled, the M&C address in the configuration file
will replace any M&C address you currently have set in the modem. This is not the case when
uploading files via the web interface.
2:Recall
4:Save to USB
2:Recall
4:Save to USB
6-92
Load: select config required
[TEST04142020]
New:[TEST04142020]
Recall: select config required
[
]
New:[TEST04142020]
Advertisement
Table of Contents
