Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
8.8.3.3 Hub IP Settings
There are a few miscellaneous IP settings that need to be selected before moving on to
configure the remote modems. Go to the 'IP' tab to see those settings.
1.
The Q-MultiFlex-400™ is shipped with an IP processing card as standard. Though it
is internal to the modem, it works separate to the main motherboard. The IP traffic card
will apply the QoS rules or TCP acceleration in an IP bridge mode. The processed
traffic then gets inserted into the modem via a patch cable. The modem is set to what
we call 'Trunking mode' – which is a low-jitter fast throughput mode.
The default for the 'Bridge M&C' option is on. For most applications this will need to be
2.
unchecked (off).
3.
The default satellite buffer size is 256 packets. The QMultiFlex-400™ works better
with a buffer size of 8 packets, especially if implementing QoS rules.
4.
The M&C VLAN default is 0. VLAN 1 has been chosen as the management VLAN and
is enabled here (checked).
1
4
Figure 8-37 QMultiFlex-400™ Edit->IP Settings
3
8-51
2
Advertisement
Table of Contents
