Preliminary Testing - Teledyne QMultiFlex-400 Installation And Operating Handbook

Mcpc/scpc hub
Table of Contents

Advertisement

QMultiFlex-400™ Installation and Operating Handbook
8.8.5

Preliminary Testing

Once configured, as long as all of the RF cables are connected as shown in section 8.7.2
and no noise is applied, then all modems should be displaying green status LED lights for:
Unit, Rx Traffic, Tx Traffic and Tx Carrier. QMultiFlex-400™ Summary Status page:
Figure 8-48 QMultiFlex-400™ Status Page
QMultiFlex-400™ Demod Status page should look something like this:
Figure 8-49 QMultiFlex-400™ Demod 1 to 8 Status Page
While connected to the QMultiFlex-400™, the remote M&C web GUI M&C connections
should be available over the link (M&C VLAN). All remote status pages should look like the
screen in Figure 8-50 (Remote 1 shown).
8-59

Advertisement

Table of Contents
loading

Table of Contents