QMultiFlex-400™ Installation and Operating Handbook
11.8 Start-up Problems
Fault Text
Unit fails to boot, due to an
invalid configuration, but
passes the initial built in
test, proceeding to the
initialising screen.
Software upgrade fails or
unit fails to boot.
Notes
Remove the mains input lead, wait for a short period of
time and then re-power the unit. As soon as the
initialising screen is reached enter 1, 3, 7, and 9 using
the keypad. The scrolling full stops seen after the
initialising message should change to asterisks (****) and
the Modem will boot. The invalid configuration will be
stored to memory named 'deleted_date'.
Hold down the [main] button whilst applying power,
choose the front panel menu option: [rescue], connect a
PC to the top Ethernet port (IP traffic) and browse to the
default IP address of the modem,
10.0.70.1, login as normal then upload the new software
using the upgrade button.
11-6
To
To
Relays
Other
Ter
Sat