Ipv4/Ipv6 Mode - Teledyne QMultiFlex-400 Installation And Operating Handbook

QMultiFlex-400™ Installation and Operating Handbook
1000M half-duplex
1000M full duplex
10M half-duplex
(fixed)
10M full duplex
(fixed)
100M half-duplex
(fixed)
100M full duplex
(fixed)
1000M half-duplex
(fixed)
1000M full duplex
(fixed)
6.2.22.12

IPv4/IPv6 Mode

IPv4 only This enables the entry and display of IP addresses in IPv4 format only.
The modem will bridge IPv4 and IPv6 packets when in IPv4 mode but will
route only IPv4 packets.
IPv4 and This enables the entry and display of IP addresses in either IPv4 format
IPv6 or IPv6 format.
The modem will bridge and route both IPv4 and IPv6 packets in this
mode.
The modem will auto-negotiate the Ethernet speed and duplex
settings but as part of the negotiation will 'advertise' 1000Mbps
half-duplex as the only option available.
The modem will auto-negotiate the Ethernet speed and duplex
settings but as part of the negotiation will 'advertise' 1000Mbps
full duplex as the only option available.
The modem's Ethernet interfaces will be fixed to 10Mbps half-
duplex operation.
The modem's Ethernet interfaces will be fixed to 10Mbps full
duplex operation.
The modem's Ethernet interfaces will be fixed to 100Mbps half-
duplex operation.
The modem's Ethernet interfaces will be fixed to 100Mbps full
duplex operation.
The modem's Ethernet interfaces will be fixed to 1000Mbps half-
duplex operation.
The modem's Ethernet interfaces will be fixed to 1000Mbps full
duplex operation.
Table 6-40 Ethernet Speed/Duplex
Table 6-41 IPv4/IPv6 Mode
6-56