Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
6.2.11.6 Modem Identity
The Modem identifier is a user-assigned text string that is typically used to uniquely identify
the modem, satellite service or location. It is displayed as the ID field on the left-hand-side
of every web page.
6.2.11.7 Submit Mode
Submit mode is used when reconfiguring remote modems in order to simplify the process
of synchronising configuration changes at both ends of the link in order not to break the link
while changing multiple control parameters. When submit mode is active, a Submit button
appears on the web user interface as shown in Figure 6-26.
Figure 6-26 Modem Status Summary Screen with Submit Mode Button
In this mode, none of the configuration changes made to the modem will be activated until
the Submit button is pressed. This is true even if the control parameters that are being
changed are spread over multiple web pages. Once all the changes have been made, the
Submit button should be pressed and this will activate all of the accumulated control
changes. This minimises service downtime when making configuration changes. Switching
off the submit mode reverts the modem to the mode where each control change is activated
instantaneously.
It should be noted that the Q-NET Navigator control application (which can be downloaded
freely from the Teledyne Paradise Datacom web site) has the ability to configure hub and
remote modems without the user having to be concerned with how the changes are
synchronised between the modems, thereby removing this problem entirely.
6-36
Advertisement
Table of Contents
