Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
Figure 6-19 Edit->Service->General->Tx QoS Screen for
Primary QoS: IP Address (Multiple Streams) – QoS Rule Entry
Any combination of source/destination addresses and a range of ports can be used to
define the packets that will be governed by each QoS rule. For each QoS rule, the
bandwidth to be made available is defined by the CIR and BIR values.
6.2.6.7 Screen for Primary QoS: Diffserv
When the primary QoS method is set to Diffserv then the screen shown in Figure 6-20 will
be displayed. Note: The QoS accordion bar may need to be clicked to expand the page.
Not available for Multiple Tx Streams.
6-26
Advertisement
Table of Contents
