Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
Figure 6-38 Edit->Unit->Miscellaneous->Time Screen
6.2.19
Edit->Unit->Miscellaneous->Reset Screen
The Edit->Unit->Miscellaneous->Reset screen is shown in Figure 6-39. Clicking the 'Reset
modem' button allows the modem to be reset, following confirmation.
Figure 6-39 Edit->Unit->Miscellaneous->Reset Screen
6.2.20
Edit->Unit->Miscellaneous->NTP Screen
The Edit->Unit->Miscellaneous->NTP screen is shown in Figure 6-40. This supports using
the Network Time Protocol (NTP) to synchronise the modem to the attached computer
system. This requires the input of an NTP server IP address that provides a master source
of Coordinated Universal Time (UTC). A secondary NTP server address can also be used.
6-47
Advertisement
Table of Contents
