Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
6.2.3
Edit Screen
The Edit screen contains the following tab menu options:
•
Service. These menus allow setup of the modem transmit and receive paths plus
BUC & LNB.
•
Unit. These menus contain all the general modem configuration settings including
monitor and control, alarms, Carrier ID, Software Activated Features (SAF) and
RTC time settings. They also include a software upgrade facility.
•
IP. This menu allows setup of all IP related functions.
•
Paired Carrier. This menu controls the parameters of the Hub Canceller function.
•
Memories. These menus support the storing, recall, deletion, upload and download
of modem configurations.
•
Redundancy. These menus control modem 1:1 and 1:N redundancy.
When a value is changed in an edit or dropdown box, the
background for the box will change to red while the modem is
actioning the change, as shown in the example below.
The box will change back to its standard background colour when
the modem has implemented the change. Note that each change
must be fully completed before the next change can be made.
Figure 6-10 Edit tabs
Example of Modem Actioning a User-Requested Change
6-10
Advertisement
Table of Contents
