Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
6.2.9.5 Mute LNB Services in Standby
This is an On/Off control used to enable and disable the transfer of LNB DC and 10MHz
services from a failed modem to a backup modem in a 1:1 or 1:N redundancy system.
Setting the checkbox causes the services to switch over from the online modem to the
backup modem on a failure.
6.2.10
Edit->Unit Screen
The Edit->Unit screen contains the following tab menu options:
•
M&C. This controls remote M&C settings including serial control settings and user
passwords.
•
Alarms. This controls alarm thresholds and actions.
•
SAF. This allows the entry of Software Activated Feature (SAF) codes that enable
modem feature activations in the field.
•
Upgrade. This allows the modem software to be upgraded.
•
Miscellaneous. This allows the date and time to be set on the modem, as well as
allowing a modem to be reset without having to power it down.
•
Carrier ID.
6.2.11
Edit->Unit->M&C Screen
The Edit->Unit->M&C screen is shown in Figure 6-25.
The Edit->Unit->M&C screen is split into several parts as described in the following
sections.
Figure 6-25 Edit->Unit->M&C Screen
6-33
Advertisement
Table of Contents
