Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
Figure 6-20 Edit->Service->General->Tx QoS Screen for
Primary QoS: Diffserv (Single Stream)
The standard Diffserv classes are listed in the left-hand column. A default rule is available to
explicitly reserve bandwidth for non-Diffserv packets.
6.2.6.8 Screen for Primary QoS: IEEE 802.1p
When the primary QoS method is set to IEEE 802.1p then the screen shown in Figure 6-21
will be displayed. Note: The QoS accordion bar may need to be clicked to expand the page.
Not available for Multiple Tx Streams.
6-27
Advertisement
Table of Contents
