Table of Contents
Advertisement
QMultiFlex-400™ Installation and Operating Handbook
View
Displays detailed operational status and read-only configurable property
values.
Test
Controls the selection of test modes.
Please refer to the equivalent web user interface menus for further
information on the front-panel menu options. Note that complex,
advanced features of the web user interface such as graphs, static
routes and traffic shaping are not supported via the front panel. All
basic modem status and setup, as well as many advanced features,
can however be accessed via the front panel.
6.3.4
Extracting Configurations to USB drive - Via the Front Panel
When extracting configurations, the first step is to store the configuration in memory. To navigate to
the memory screen, press: Main, Edit, Memories
1:Store
3:Erase
5:Load USB
Select 1 for Store. Use the alphanumeric keypad to enter a configuration name and press enter. In
this example it is 'TEST04142020'.
Store: select name or enter new
[TEST04142020
New:[Functional_Test]
A USB drive will need to be plugged into the front panel.
1:Store
3:Erase
5:Load USB
To transfer a stored modem configuration file to a USB drive, from the Memories menu, select
'4:Save to USB'.
Use the up and down arrows to select the configuration name you want to transfer to the USB drive,
then press the enter key. Once saved, the configuration name will appear within the top set of
brackets.
Save: select config required
[
]
New:[TEST04142020]
The USB memory device can now be removed. The configuration file or files can now be transferred
to a PC or loaded into other modems e.g. another modem in a 1:1 pair.
2:Recall
4:Save to USB
]
[QMultiFlex-400]
1:Status
3:View
2:Recall
4:Save to USB
6-91
2:Edit
4:Test
Save: select config required
[TEST04142016]
New:[TEST04142020]
Advertisement
Table of Contents
