Chapter 6 User Interfaces; User Control; Local; Local+Remote - Teledyne QMultiFlex-400 Installation And Operating Handbook

Mcpc/scpc hub
Table of Contents

Advertisement

QMultiFlex-400™ Installation and Operating Handbook

6.1 User Control

The modem has both front-panel and web browser user interfaces.
For remote web access, there are two fixed usernames, namely, admin and user. The
admin user can view and change the modem configuration, while user can only view the
modem settings. Only admin can change the passwords associated with these two
usernames. There is no restriction on the number of users (as either admin or user) that
can be logged in at the same time.
6.1.1

Local

Local mode allows control of the modem from the front-panel interface only. Web users
are still able to log in and view the modem settings in this mode.
6.1.2

Local+remote

In Local+remote mode, the modem can be controlled through the front-panel or via a
remote admin user at the same time. When the modem is switched out of Local+remote
mode to Local mode, then all remote admin users will be automatically logged out.
While Local+remote mode is very convenient, it is important for there to be operational
procedures in place to avoid conflicts arising in relation to modem control.

Chapter 6 User Interfaces

6-1

Advertisement

Table of Contents
loading

Table of Contents