Scanner Motor Malfunction - Xerox Phaser 6115MFP Service Manual

101H Scanner Motor Malfunction
Phaser 6115MFP Multifunction Product Service Manual
Troubleshooting Procedure Table (Continued)
Step Action and Questions
3 Check the operation of the Scanner
Cooling Fan Motor.
Is the motor operational?
Replace the Engine Control Board
4
(page 8-57).
Is the system operational?
Replace the DC Power Supply 2
5
(page 8-68).
Is the system operational?
Replace the DC Power Supply 1
6
(page 8-60).
Inoperative Scanner motor.
Applicable Status Code
101H:

Scanner Motor Malfunction

Initial Actions
Remove power from the system and reboot.
Print a test page.
Troubleshooting Reference Table
Applicable Parts
Engine Control Board,
PL4.19.15
Scanner Motor, PL4.8.11
DC Power Supply 1, PL4.19.3
DC Power Supply 2, PL4.5.4
Warning
To avoid the potential of electric shock, ensure the power to the printer is
off and the power cord is disconnected from the wall outlet prior to
performing each step of the following troubleshooting procedure.
Error Codes and Messages
Yes
Go to Step 4.
Complete
Complete
Complete
Wiring and Plug/Jack References
Boards and Power Supplies Locator (page 1-14)
Motors and Fans Locator (page 1-15)
Image Processor Board to Laser and Scanner
Wiring (page 10-21)
Engine Control Board to DC Power Wiring
(page 10-18)
No
Check pulse
output of L-9
from MP/J1,
pin 1 (ON) and
MP/J1, pin 3
(LOCK). If no
output, go to
Step 5.
Go to Step 5.
Go to Step 6.
3-29