Polygon Motor Malfunction - Xerox Phaser 6115MFP Service Manual

Error Codes and Messages
10H Polygon Motor Malfunction
Applicable Status Code
Initial Actions
3-16
Troubleshooting Procedure Table
Step Action and Questions
Check the Power Supply Cooling Fan
1
connector P/J4 between the fan and the
Engine Control Board.
Is the connector seated properly?
Check the Power Supply Cooling Fan for
2
proper operation.
Is the fan operational?
3 Replace the Engine Control Board
(page 8-57).
Does the problem persist?
4 Replace the DC Power Supply 1
(page 8-60).
Polygon Motor inoperative, noisy, or erratic.
10H:

Polygon Motor Malfunction

Check power cord and connections.
Power down and reboot the system.
Troubleshooting Reference Table
Applicable Parts
Laser Unit, PL4.14.1
Engine Control Board,
PL4.19.15
Warning
To avoid the potential of electric shock, ensure the power to the printer is
off and the power cord is disconnected from the wall outlet prior to
performing each step of the following troubleshooting procedure.
Yes
Go to Step 2.
Go to Step 3.
Go to Step 4.
Complete
Wiring and Plug/Jack References
Print Engine Board Plug/Jack Designators
(page 10-3)
Engine Control Board to Power Supply and
Laser Unit Wiring (page 10-14)
Image Processor Board to Laser and Scanner
Wiring (page 10-21)
Phaser 6115MFP Multifunction Product Service Manual
No
Reseat the
connector. If the
problem
persists, go to
Step 2.
Replace the
motor
(page 8-94).
Complete.