Fusing Unit (Pl4.18.12) - Xerox Phaser 6115MFP Service Manual

Service Parts Disassembly

Fusing Unit (PL4.18.12)

8-36
1. Remove the Rear Cover (page 8-6).
2. Remove the Left Cover (page 8-7).
3. Remove the Transfer Belt Unit (page 8-33).
4. Remove 1 screw (metal, 8mm) and remove the Top Left Cover.
Note
You may need to raise or lower the Top Cover as necessary to allow
for clearance.
5. Disconnect two connectors (P/J6 and P/J7) from the Engine Control
Board.
Phaser 6115MFP Multifunction Product Service Manual
s6115-270
s6115-271