Xerox Phaser 6115MFP Service Manual page 294

Service Parts Disassembly
Precautions for Reinstallation of the Laser Unit
8-24
Replacement Note
When reinstalling the Laser Unit, make sure that you insert the lever
of the Laser shutter into the lever of the machine.
Be sure to use the original screws and that the gear is in place when
reinstalling the unit.
To reinstall the laser covers, insert the two back tabs before the front
tab to align properly.
Reconnect the blue connector before you reinstall the cover.
To reinstall the ribbon cable, loosen the lower tab on the plastic air
duct to provide access to the route.
Laser Unit Shutter Lever
Phaser 6115MFP Multifunction Product Service Manual
s6115-314