Waste Toner Near Full Detection Board/Led (Pl4.6.6) - Xerox Phaser 6115MFP Service Manual

Service Parts Disassembly

Waste Toner Near Full Detection Board/LED (PL4.6.6)

8-70
1. Remove the High Voltage Unit (page 8-50).
2. Remove 1 screw (metal, 10mm), unlock the tab and the wiring clamp,
then remove the shield.
Caution
Use caution when unlocking the tab.
'
Clamp
Note
When reinstalling the shield, make sure that no part of the wiring
harness is wedged in the mechanism.
Tab
Tab
Tab
Phaser 6115MFP Multifunction Product Service Manual
Shield
s6115-305
s6115-306