Scanner Cooling Fan Motor Malfunction - Xerox Phaser 6115MFP Service Manual

Error Codes and Messages
31H Scanner Cooling Fan Motor Malfunction
Applicable Status Code
Initial Actions
3-28
Inoperative Scanner Cooling Fan Motor.
31H:

Scanner Cooling Fan Motor Malfunction

Remove power from the system and reboot.
Print a test page.
Troubleshooting Reference Table
Applicable Parts
Engine Control Board,
PL4.19.15
Scanner Cooling Fan Motor,
PL4.8.10
DC Power Supply 1, PL4.19.3
DC Power Supply 2, PL4.5.4
Warning
To avoid the potential of electric shock, ensure the power to the printer is
off and the power cord is disconnected from the wall outlet prior to
performing each step of the following troubleshooting procedure.
Troubleshooting Procedure Table
Step Action and Questions
1 Check the Scanner Cooling Fan Motor
connector CN9 for proper connection. Is
the connector seated properly?
2 Check the Engine Control Board
connector MP/J1 for proper connection.
Is the connector seated properly?
Wiring and Plug/Jack References
Boards and Power Supplies Locator (page 1-14)
Motors and Fans Locator (page 1-15)
Image Processor Board to Laser and Scanner
Wiring (page 10-21)
Engine Control Board to DC Power Wiring
(page 10-18)
Yes
Go to Step 2.
Go to Step 3.
Phaser 6115MFP Multifunction Product Service Manual
No
Reseat the
connector. If the
problem
persists, go to
Step 2.
Reseat the
connector. If the
problem
persists, go to
Step 3.