Xerox Phaser 6115MFP Service Manual page 133

Phaser 6115MFP Multifunction Product Service Manual
Troubleshooting Reference Table
Applicable Parts
Engine Control Board,
PL4.19.15
Image Processor Board,
PL4.19.1
Scanner Unit, PL3.1.1
Warning
To avoid the potential of electric shock, ensure the power to the printer is
off and the power cord is disconnected from the wall outlet prior to
performing each step of the following troubleshooting procedure.
Troubleshooting Procedure Table
Step Action and Questions
1 Check the Engine Control Board
connector P2.
Is the connector seated properly.
Check the Image Processor Board
2
connector P/J6.
Is the connector seated properly.
Check the exposure lamp when power is
3
applied. Is the lighting normal?
4 Replace the scanner unit (page 8-25).
Is the system operational?
Replace the Engine Control Board
5
(page 8-57). Is the system operational?
Replace the Image Processor Board
6
(page 8-55).
Error Codes and Messages
Wiring and Plug/Jack References
Print Engine Board Plug/Jack Designators
(page 10-3)
Print Engine Wiring Map (page 10-12)
Engine Control Board to DC Power Wiring
(page 10-18)
Image Processor Board to Laser and Scanner
Wiring (page 10-21)
Yes
Go to Step 2.
Go to Step 3.
Complete
Complete
Complete
Complete.
No
Reseat the
connector, then
go to Step 2.
Reseat the
connector, then
go to Step 3.
Go to Step 4.
Go to Step 5.
Go to Step 6
3-31