Xerox Phaser 6115MFP Service Manual page 313

Phaser 6115MFP Multifunction Product Service Manual
16. Remove 2 screws (metal, 10mm) and remove the Fusing Unit.
Note
Make sure that the docking gear shaft of the Fusing Unit fits in the
hole of the fusing frame.
Replacement Note
Reinstall the Fuser Unit in the reverse order of the previous steps.
When reinstalling the left cover after reinstalling the Fusing Unit,
make sure that the harness of the Fusing Unit is located below the rib
of the left cover.
Service Parts Disassembly
s6115-282
8-43