System Configurations - Xerox Phaser 6115MFP Service Manual

General Information

System Configurations

1-4
The Phaser 6115MFP Multifunction Product is available in two configurations.
The main differences is the addition of the Duplex Unit to enable 2-sided
printing. The following table lists both configurations.
Features
Max Print Speed (ppm) color/monochrome
Memory*
USB Port
10/100 Ethernet Port
Duplex Unit
PostScript and PCL Fonts
Print Resolutions (dpi):
Draft
Standard
Enhanced
Copy Speed (dpi or ppm):
600x300
600x600
Scan Resolutions (dpi or ppm):
600x300
600x600
500-Sheet Feeder**
* All configurations have two memory slots supporting 256 MB and 512 MB cards, to
a maximum of 1 GB.
**One 500-sheet feeder (Tray 2)
Configuration
6115N
5/20
128 MB
Yes
Yes
No
Yes
600x600
1200x600
2400x600
Color/Mono
5/12 ppm
2.5/6 ppm
Color/Mono
70/30 mm/
sec
35/14 mm/
sec
Optional
Phaser 6115MFP Multifunction Product Service Manual
6115D
5/20
128 MB
Yes
Yes
Yes
Yes
600x600
1200x600
2400x600
Color/Mono
5/12 ppm
2.5/6 ppm
Color/Mono
70/30 mm/
sec
35/14 mm/
sec
Optional