Xerox Phaser 6115MFP Service Manual page 11

Servicing Electrical Components
Servicing Mechanical Components
Servicing Fuser Components
Phaser 6115MFP Multifunction Product Service Manual
Before starting any service procedure, switch off the printer power and unplug
the power cord from the wall outlet. If you must service the printer with power
applied, be aware of the potential for electrical shock.
Warning
Do not touch any electrical component unless you are instructed to do so
by a service procedure.
s6115-216
When servicing mechanical components within the printer, manually rotate
drive assemblies, rollers, and gears.
Warning
Do not try to manually rotate or manually stop the drive assemblies while
any printer motor is running.
s6115-217
Warning
This printer uses heat to fuse the toner image to media. The Fusing Unit
is VERY HOT. Turn the printer power off and wait at least 5 minutes for the
Fusing Unit to cool before you attempt to service the unit or adjacent
components.
0
5 min.
ix