Service Parts Disassembly
Fusing Motor (PL4.11.1)
Developing Motor (PL4.13.8)
8-98
1.
Use the procedures for removing the Right Cover (page 8-8).
2.
Remove the Right Frame (page 8-90).
3.
Remove 2 screws (metal, 10mm) and disconnect the connector.
4.
Remove the harness from the wiring clamp and then remove the Fusing
Motor.
Replacement Note
Be sure to use the original screws and that the gear is in place when
reinstalling the motor.
1.
Open the Top Cover (page 8-4).
2.
Remove the Right Cover (page 8-8).
3.
Remove the Front Cover (page 8-10).
Phaser 6115MFP Multifunction Product Service Manual
s6115-323