Adjustment; Prn Main Regist - Xerox Phaser 6115MFP Service Manual

Adjustments and Print Function Settings

2 Adjustment

PRN Main Regist

6-10
Function:
To vary and adjust the print start position in the main scanning direction.
Use:
If the image on the copy deviates in the main scan direction or when the Laser
Unit has been replaced.
Adjustment:
Adjust the amount that widths A and B in the printed test pattern1 are shifted
so that the following specification is met.
Specification:
0 ± 2.0 mm
Adjustment Range:
-4.0 (-4.0 mm), ~ 0.0 (0.0 mm default), ~ +4.0 (+4.0 mm)
Step:
0.1 mm
Procedure:
1. Print the test pattern 1 (page 6-27).
2. Check the amount that widths A and B in the test pattern 1 are shifted. If
the shift is out of specification, adjust it according to the following
procedure.
a. Enter the [2. ADJUST] menu in the service mode.
b. Select [PRN MAIN REGIST] of [2. ADJUST] and press the Menu
Select key twice.
B
A
s6115-503
Phaser 6115MFP Multifunction Product Service Manual