Paper Take-Up Unit (PL4.20.1)
Phaser 6115MFP Multifunction Product Service Manual
1.
Remove the Rear Cover (page 8-6).
2.
Remove the Right Cover (page 8-8).
3.
Remove the Left Cover (page 8-7).
4.
Remove the High Voltage Unit (page 8-50).
5.
Remove 1 screw (metal, 10mm), unlock the tab, and release the wiring
harness from the clamp. Then, remove the shield.
Caution
When reinstalling the shield, make sure that no part of the harness is
wedged in the mechanism.
6.
Remove the Rack Drive Assembly. See the removal procedure steps 4 to
6 when disassembling the "Developing Motor (PL4.13.8)" on page 98.
7.
Remove the Ventilation Fan Motor (page 8-96).
8.
Remove 1 screw (metal, 8mm) and unlock two tabs.
Clamp
Service Parts Disassembly
Tab
Shield
s6115-305
8-45