Blurred Image - Xerox Phaser 6115MFP Service Manual

Print-Quality Troubleshooting

Blurred Image

Initial Actions
5-30
The overall image density is blurry.
Verify the media used is supported by this printer.
Verify the media settings are correct at the Control Panel.
Troubleshooting Reference Table
Applicable Parts
Laser Unit, PL4.14.1
Imaging Unit, PL4.15.9
Toner Cartridge (See consumables parts
list)
Troubleshooting Procedure Table
Step Actions and Questions
Inspect the Laser Unit.
1
Is the window surface
dirty?
Inspect the Imaging Unit.
2
Is the outside of the surface
dirty?
3 Has the problem been
eliminated?
Example Print
nthemum x
nthemum x
Chrysanthemum x morifolium Chrysanthemum x morifolium nthemum x nthemum x
Yes
Carefully clean the
window surface. If the
problem persists, go
to Step 2.
Clean the surface. If
the problem persists,
go to Step 3.
Complete
Phaser 6115MFP Multifunction Product Service Manual
Chrysanthemum x morifolium
Fuzzy Text
No
Go to Step 2.
Go to Step 3.
Replace the following
units, listed in order,
until problem is
eliminated:
Toner Cartridge
(page 7-11)
Laser Unit
(page 8-15)
Imaging Unit
(page 8-13)