AWD Rear Transmission Installation (continued)
AWD Front Transmission Replacement
AWD Front Transmission Removal
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
13. Models equipped with the 60v powerhead, install the harness to the
powerhead.
1. Park the machine on a level surface, stop the engine and wait for all moving
parts to stop.
2. Models equipped with the 60v powerhead, remove the harness from
powerhead.
3. Models equipped with electric start only, remove the 2 (M4.2 x 2.0)
screws securing the battery cover. Remove the battery cover and foam pad.
Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
4. Remove the grass bagger assembly if attached.
5. Remove the AWD front wheels.
6. Remove the upper intake from the deck.
7. Remove the transmission return spring from the shoulder bolt and
transmission bracket.
g360054
8. Remove the front traction cable anchor from the transmission mount and the
cable return spring from the deck.
AWD Front Wheel Removal (page 7–7)
Upper Intake Removal (page 6–18)
Figure 146
Page 7–17
Drive System: Service and Repairs