Toro 21462 Service Manual page 93

Rear Height-of-Cut Disassembly (continued)
Rear Height-of-Cut Assembly
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g359620
2. Using a 1 ¼ inch socket or wrench, rotate the bushing retainer
counterclockwise to remove the bushing retainer and sleeve bushing from
the rear pivot arm.
g359619
3. Remove the rear pivot arm and spring arm from the height-of-cut plate.
1. Install the rear pivot arm and spring arm to the height-of-cut plate.
2. Install the sleeve bushing and bushing retainer into the height-of-cut plate.
3. Install the sleeve bushing onto the rear pivot arm.
Figure 107
Figure 108
Page 6–15 Deck: Service and Repairs