RWD Traction Cable Installation (continued)
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g352894
5. Using a 3/8 inch wrench, install the lock nut and curved washer securing the
cable anchor to the handle. Torque the nut to 4.52 ± 0.56 N • m (40 ± 5 in-lbs).
g352893
6. Models equipped with electric start only, connect the battery by installing
the positive cable first, then the negative cable to the battery. Install the foam
pad and battery cover. Secure the battery cover with 2 (M4.2 x 2.0) screws.
Torque the screws to 2.26 ± 0.34 N • m (20 ± 3 in-lbs).
7. Models equipped with the 60v powerhead, install the harness to the
powerhead.
Figure 29
Figure 30
Page 5–13
Controls: Service and Repairs