AWD Front Traction Cable Replacement
AWD Front Traction Cable Removal
Controls: Service and Repairs
1. Park the machine on a level surface, stop the engine and wait for all moving
parts to stop.
2. Remove the grass bagger assembly if attached.
3. Remove the nut and (1/4–20 inch) carriage bolt securing the cable anchor to
the handle.
g359929
4. Remove the plastic cable clamp and washer.
5. Remove the front traction cable from the cable yoke.
g359932
6. Remove the upper intake from the deck.
7. Remove the front traction cable anchor from the transmission mount and the
cable return spring from the deck.
Figure 31
Figure 32
Upper Intake Removal (page 6–18)
Page 5–14
22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A