AWD Rear Transmission Installation (continued)
Drive System: Service and Repairs
g352576
8. Install the 2 (1/4–10 inch) LH screws securing the rear baffle to the deck.
Torque the screws to 2.82 ± 0.56 N • m (25 ± 5 in-lbs). Repeat on the RH
side of the unit.
g352575
9. Install the blade to the engine crank. Refer to the product Operator's Manual
for the blade installation procedures.
10. Install the brake cable.
11. Install the AWD rear traction cable.
(page 5–18)
12. Models equipped with electric start only, connect the battery by installing
the positive cable first, then the negative cable to the battery. Install the foam
pad and battery cover. Secure the battery cover with 2 (M4.2 x 2.0) screws.
Torque the screws to 2.26 ± 0.34 N • m (20 ± 3 in-lbs).
Figure 144
Figure 145
Brake Cable Installation (page 5–6)
AWD Rear Traction Cable Installation
Page 7–16
22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A