Engine/Powerhead Installation (continued)
Power Source: Service and Repairs
g352011
5. Install the belt onto the drive blade.
6. Install the blade onto the engine crank. Refer to the product Operator's
Manual for the blade installation procedures.
7. Install the brake cable.
8. Models equipped with electric start only, connect the battery by installing
the positive cable first, then the negative cable to the battery. Install the foam
pad and battery cover. Secure the battery cover with 2 (M4.2 x 2.0) screws.
Torque the screws to 2.26 ± 0.34 N • m (20 ± 3 in-lbs).
9. Models equipped with the 60v powerhead, install the harness to the
powerhead.
Figure 10
Brake Cable Installation (page 5–6)
Page 4–8
22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A