Toro 21462 Service Manual page 50

AWD Rear Traction Cable Removal (continued)
AWD Rear Traction Cable Installation
Controls: Service and Repairs
g359931
7. Rotate the transmission forward to gain access to the cable anchor on the
belt guide.
8. Release the cable anchor and disconnect the rear traction cable from the
transmission arm.
g352896
9. Remove the rear traction cable from the unit.
1. Connect the rear traction cable to the traction arm.
2. Install the cable anchor to the belt guide.
3. Install the (1/4–20 inch) screw securing the transmission to the deck. Torque
the screw to 9.04 ± 1.69 N • m (80 ± 15 in-lbs).
Figure 39
Figure 40
Page 5–18 22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A