Toro 21462 Service Manual page 104

Deck Installation (continued)
Deck: Service and Repairs
g361255
3. AWD models only, install the AWD front transmission.
Transmission Installation (page 7–19)
4. Install the rear height-of-cut assemblies.
(page 6–16)
5. RWD models only, install the RWD front height-of-cut assembly.
Height-of-Cut Installation (page 6–9)
6. AWD models only, install the AWD front height-of-cut assembly.
Height-of-Cut Installation (page 6–11)
7. Install the power head.
8. Install the curved handle onto the chassis.
(Non—Electric Start Models Only) (page 5–39) Curved Handle Installation
(Electric Start Models Only) (page 5–43)
9. Install the LH handle knob onto the curved handle. Repeat on the RH side of
the unit.
10. Install the brake cable.
11. RWD models only, install the RWD traction cable.
Installation (page 5–11)
12. AWD models only, install the AWD front and rear traction cables.
Front Traction Cable Installation (page 5–15) AWD Rear Traction Cable
Installation (page 5–18)
13. Models equipped with electric start only, connect the battery by installing
the positive cable first, then the negative cable to the battery. Install the foam
pad and battery cover. Secure the battery cover with 2 (M4.2 x 2.0) screws.
Torque the screws to 2.26 ± 0.34 N • m (20 ± 3 in-lbs).
14. Models equipped with the 60v powerhead, install the harness to the
powerhead.
Figure 125
Rear Height-of-Cut Installation
Engine/Powerhead Installation (page 4–6)
Brake Cable Installation (page 5–6)
Page 6–26 22 Inch AWD/RWD Steel Deck Walk Power
AWD Front
RWD Front
AWD Front
Curved Handle Installation
RWD Traction Cable
Mower Service Manual
3445-579 Rev A
AWD