Battery Assembly Removal (Electric Start Models Only) (continued)
Battery Assembly Installation (Electric Start Models Only)
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g352577
9. Remove the belt guide guard from the deck.
10. Remove the 2 (M4.5 x 2.0) screws securing the battery tray to the chassis.
Remove the battery tray from the chassis.
1. Install the battery tray to the chassis, secure with the 2 (M4.5 x 2.0) screws.
Torque the screws to 2.26 ± 0.34 N • m (20 ± 3 in-lbs).
2. Install the belt guide guard onto the deck, secure with 2 (1/4–10 inch) screws.
Torque the screws to 2.82 ± 0.56 N • m (25 ± 5 in-lbs).
g352577
3. Install the baffle to the deck, secure with a (1/4–10 inch) screw. Torque the
screws to 2.82 ± 0.56 N • m (25 ± 5 in-lbs).
Figure 172
Figure 173
Page 8–13
Electrical: Service and Repairs