RWD Front Height-of-Cut Removal (continued)
RWD Front Height-of-Cut Installation
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g352366
1.
Height-of-Cut Lever
2.
Front Pivot Arm
9. Remove the 2 (5/16–18 inch) screws and 2 nuts securing the height-of-cut
plate to the LH deck. Remove the height-of-cut plate from the LH deck.
Repeat on the RH side of the unit.
g352391
1. Install the front height-of-cut plate to the LH deck and secure with 2 (5/16–18
inch) screws and 2 nuts. Torque the nuts to 19.2 ± 3.39 N • m (170 ± 30
in-lb). Repeat on the RH side of the unit.
Figure 97
3.
Mount Bushing
Figure 98
Page 6–9
Deck: Service and Repairs