RWD PERSONAL PACE® Handle Assembly Installation (continued)
RWD PERSONAL PACE® Handle Assembly Inspection
Controls: Service and Repairs
g352638
15. Install the brake cable into the cable anchor.
g352637
16. Install the recoil rope onto the rope guide.
17. Models equipped with electric start only, connect the battery by installing
the positive cable first, then the negative cable to the battery. Install the foam
pad and battery cover. Secure the battery cover with 2 (M4.2 x 2.0) screws.
Torque the screws to 2.26 ± 0.34 N • m (20 ± 3 in-lbs).
18. Models equipped with the 60v powerhead, install the harness to the
powerhead.
1. Verify the traction control rod returns to a neutral position smoothly. If
excessive force is observed, inspect the torsion spring for the correct amount
of wrap.
Note: The spring has half of the rotation wrap when fully assembled.
Figure 62
Figure 63
Page 5–30
22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A