Rear Height-of-Cut Removal (continued)
Rear Height-of-Cut Disassembly
Deck: Service and Repairs
g361222
9. Position the LH tab on the trailing shield in alignment with the cutout in the
LH height-of-cut plate. Repeat on the RH side of the unit.
10. Remove the rear LH height-of-cut plate assembly from the deck. Repeat
on the RH side of the unit.
g359631
1.
Spring Arm
2.
Rear Height-of-Cut Plate
3.
Bushing Retainer
1. Clamp the rear pivot arm in a vice.
Figure 105
Figure 106
4.
Sleeve Bushing
5.
Rear Pivot Arm
Page 6–14
22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A