Brake Cable Removal (continued)
Brake Cable Installation
Controls: Service and Repairs
g352641
1. Install the z bend of the brake cable onto the anchor.
g352641
2. Install the brake cable anchor onto the engine assembly by pressing the
cable anchor into the switch assembly.
3. Install the cable guide onto the curved handle.
4. Install the bail onto the PERSONAL PACE® handle assembly.
5. Install the z bend of the brake cable onto the bail.
Figure 16
Figure 17
Page 5–6
22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A