Hydrostatic Drive Transmission Replacement - Toro TITAN Max Service Manual

Hydrostatic Drive Transmission Replacement

Hydrostatic Drive Transmission Removal
TITAN® Max Service Manual
3442-428 Rev A
1. Park the machine on a level surface and disengage the PTO. Stop the engine,
wait for all moving parts to stop, and remove key. Engage the parking brake.
2. Disconnect the battery by removing the negative cable first, then the positive
cable from the battery.
3. Raise and support the unit so that the front wheels are off the ground, block
rear wheels.
4. Remove the drive wheels.
5. Remove the deck drive belt from the mower deck.
(page 6–10)
6. Remove the hydrostatic drive belt from the machine.
Removal (page 7–8)
7. Disconnect the motion control linkage from the transmission.
8. Disconnect the bypass arm.
g336196
9. Disconnect the lower brake linkage from the transmission.
g336197
10. Disconnect the hydraulic fluid hose from the top of the transmission.
Figure 101
Figure 102
Page 7–5 Hydrostatic Drive System: Service and Repairs
Deck Drive Belt Removal
Hydrostatic Drive Belt