Toro 21462 Service Manual page 66

AWD PERSONAL PACE® Handle Assembly Removal (continued)
AWD PERSONAL PACE® Handle Assembly Installation
Controls: Service and Repairs
g353179
17. Remove the LH curved guide from the curved handle.
1. Install the traction lever and washer onto the LH side of the traction rod.
2. Install the torsion spring onto the RH side of the traction rod.
3. Install the LH and RH curved guides onto the curved handle.
4. Install the traction rod onto the curved handle.
5. Install the torsion spring onto the curved handle.
g353082
6. Point the traction lever upwards and rotate the traction rod 3/4 turn so that the
traction lever is pointing backwards. Install the upper PERSONAL PACE®
handle onto the curved handle.
Note: The spring has half of the rotation wrap when fully assembled.
7. If the handle pins were removed from the upper PERSONAL PACE® handle,
install the handle pins.
Figure 70
Figure 71
Page 5–34 22 Inch AWD/RWD Steel Deck Walk Power
Mower Service Manual
3445-579 Rev A