Toro 21462 Service Manual page 73

Curved Handle Removal (Electric Start Models Only) (continued)
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
2. Remove the grass bagger assembly if attached.
3. Models equipped with the 60v powerhead, remove the harness from
powerhead.
4. Remove the 2 (M4.2 x 2.0) screws securing the battery cover. Remove the
battery cover and foam pad. Disconnect the battery by removing the negative
cable first, then the positive cable from the battery.
5. Remove the 2 cable ties securing the electric starter wire harness to the
curved handle.
g353634
6. Remove the cable guide from the curved handle.
7. Loosen the (7/16 inch) screw and remove captured NI lock nut securing the
cable guide and electric starter to the curved handle. Remove the electric
starter from the curved handle.
8. Remove the RWD PERSONAL PACE® handle.
Assembly Handle Removal (page 5–20)
9. Remove the lock nut securing the rope guide to the curved handle.
Figure 83
Page 5–41
RWD PERSONAL PACE®
Controls: Service and Repairs