Toro 21462 Service Manual page 97

Upper Intake Removal (continued)
Upper Intake Installation
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g353303
10. Remove the upper intake from the deck.
1. Position the blade out of the way of the lower intake.
2. Install the upper intake onto the deck, secure with 2 (1/4 x 1.33 inch) screws.
Torque the screws to 3.39 ± 0.45 N • m (30 ± 4 in-lbs).
g353303
3. Install the bottom intake cover, secure with a (1/4 x 1.33 inch) screw. Torque
the screws to 3.39 ± 0.45 N • m (30 ± 4 in-lbs).
4. Models equipped with electric start only, connect the battery by installing
the positive cable first, then the negative cable to the battery. Install the foam
pad and battery cover. Secure the battery cover with 2 (M4.2 x 2.0) screws.
Torque the screws to 2.26 ± 0.34 N • m (20 ± 3 in-lbs).
5. Models equipped with the 60v powerhead, install the harness to the
powerhead.
Figure 114
Figure 115
Page 6–19 Deck: Service and Repairs