Toro 21462 Service Manual page 95

Rear Height-of-Cut Installation (continued)
22 Inch AWD/RWD Steel Deck Walk Power Mower Service
Manual
3445-579 Rev A
g361222
3. Install the (1/4–10 inch) screw securing the LH height-of-cut plate to the
chute assembly. Torque the screw to 3.39 ± 0.45 N • m (30 ± 4 in-lbs).
Repeat on the RH side of the unit.
g361221
4. Install the 2 (5/16–18 inch) screws and 2 lock nuts securing the LH
height-of-cut plate to the deck. Torque the nuts to 19.2 ± 3.39 N • m (170 ±
30 in-lbs). Repeat on the RH side of the unit.
Figure 111
Figure 112
Page 6–17 Deck: Service and Repairs