Curved Handle Installation (Electric Start Models Only) (continued)
Controls: Service and Repairs
g353181
4. Install the cable guide onto the curved handle.
5. Install the rope guide onto the curved handle, secure with a nut. Torque the
nut to 4.52 ± 0.56 N • m (40 ± 5 in-lbs).
g353180
6. Install the RWD PERSONAL PACE® handle.
Handle Assembly Installation (page 5–25)
7. Install the cable guide and electric starter to the curved handle, secure with
the NI lock nut and (7/16) bolt. Torque the nut to 4.52 ± 0.56 N • m (40 ±
5 in-lbs).
8. Install the cable guide onto the curved handle.
9. Install the 2 cable ties securing the electric starter wire harness to the curved
handle.
Figure 88
Figure 89
Page 5–44
22 Inch AWD/RWD Steel Deck Walk Power
RWD PERSONAL PACE®
Mower Service Manual
3445-579 Rev A